============================================================================= 
  COM2KBD Version 1.3                                  ZEBEX America, Inc.
=============================================================================


Installation Instructions
-------------------------

Run SETUP.EXE. The installation wizard will guide you
through the installation process.


Running the Program
-------------------

Double click on the shortcut for COM2KBD which has been
created on the Desktop.

Select the COM port first and then click on "Hide".
If you want to run this program automatically each time
you boot up Windows, check the checkbox! When you have
selected a communications port, the window will auto-
matically hide after a short delay when the program is
started.

You can open the Window by double clicking on the ZEBEX
logo in the system tray (next to clock on the task bar).

If you need the COM port for an other device, change the
COM port setting to "OFF". COM2KBD will not occupy the
serial port then.


Power Problems
--------------

Some Notebooks may not turn on Power to the serial port
after waking up from power saving mode. If you notice,
that label data is not transmitted, double click with
the right mouse button on the ZEBEX logo in the system
tray. Then COM2KBD will reset the COM port and the
program should work fine again.


Control Window
--------------

If the control window does not open when you double click
the ZEBEX logo in the system tray, it is already open - 
but hidden behind an other window. In this case, please
use Alt+Tab to switch to the control window.

=============================================================================
